CITATION 4 STAGE INFO

  Axis Products, Inc. is the only company on planet Earth who offers a sprayer system like this! Its design   fresh-air breathing device that would be always available for you to be able to breathe safely and comfortably while spraying toxic materials. Deadly isocyanates, VOC s and other toxins present in today's paint demand you use a Fresh Air Respirator. No other system offers "built in" respirator protection with state of the art HVLP paint sprayer in the same cabinet. Components designed to last a lifetime of rigorous use. Easy to use. Just plug in, turn on the switch and go. This unit includes a mask, two 40' hoses, the? accuspray? spray gun with a one quart cup and whip hose and hose belt attachment (tie the two hoses together). If you place ? mask under a sand blast hood, welding helmet or paint hood you will stay cool and not fog up lenses.  

No compressor is needed to operate the system, which eliminates the oil and moisture problem so prevalent with other kinds of sprayers. Another advantage is that the system is totally portable, lightweight and uses standard household electricity. A natural by-product of any turbine system is the addition of heat to the airline. The advantage of the heat is that it eliminates moisture from the air that is mixed with the paint, however, the disadvantage of this heat is that it has a tendency to also flash away some of the thinner that is added to the paint when it is mixed. This loss of thinner can render the paint droplets too dry when they are applied causing an 'orange peel' effect. The solution is to add more thinner to the paint when it is mixed to compensate for its loss. The turbine raises the temp of the air 20 degrees above the air, which must be taken into consideration in high room temperature (the motor should be run for a few minutes to let the air temperature adjust to a steady degree). Another way to help to control the heat is to add a short piece of natural rubber 'stub hose' at the pump outlet. We call it an 'HD' or heat dissipation hose and is included in every AXIS spray system.  

The way to get a great finish when spraying is to have a system that will break up the paint droplets as small as possible when it is atomized, the smaller the droplets, the better the finish.  Because this atomization (mixing the paint with the air) takes place in the nozzle of the spray gun just before it exits it stands to reason that the smaller the nozzle hole is, the smaller the droplets are broken down. The big advantage to HVLP is that it saves you at least 50% of your paint with 90% of the paint going to the surface and STAYING thus eliminating the over spray and allowing you to actually see what you are painting. The Axis Paint sprayer is a true HVLP Sprayer with 115 CFM but only 7.5PSI The kit comes with a three-stage turbine, 40 ft. of hose and a 4ft flexible hose at the gun for easier movement and the gun The gun is a ?ACCUSPRAY? gun it is a plastic gun, which is a little lighter in weight.. 

We also have many accessories and additional Products to help you get the job done right the first time With other options the web site http://clmc.hypermart.net has a lot more information or if you have questions not covered please call me toll free at 877-949-5183 or Email sales@clmcenterprises.com Our units are Proudly  Manufactured in the  in Gilberts Il.

   The retail price for the citation paint sprayer is$1295.00

              The CLM price is $1195.00