"Pro air Fresh Air Respirators, SUPPLIED AIR RESPIRATOR system."
 
clm logo     CLM Enterprises'  philosophy is to provide Quality, affordable Fresh Air respirator protection with our Hobby air & Pro air  Supplied Air Respirator breathing Systems, and Quality paint spray systems  with the Citation & Axis Sprayers. If your looking for safety in your hobby area, garage, or work area, try our line of Fresh Air and Positive Pressure respirators and paint spray systems. Along with quality car care products from 3M™  ,Bill Hirsch  specialty paints & Jescto buffing products.
 

MAIN

HOBBYAIR Fresh air Respirator

Pro-Air Fresh air Respirator OSHA Approved

Axis HVLP Paint Spray system

CITATION combination Fresh air respirator & paint sprayer 

MARKSMAN   paint sprayer

CAR CARE PRODUCTS

BILL HIRSCH
PRODUCTS

Respirator Accessories

Painting Accessories

Tapes
Replacement parts
3m ACCUSPRAY ACCESSORIES
LEX-AIR ACCESSORIES

return policy

PRO-AIR Line of Fresh  Air Respirators

     

THE PROAIR SERIES RESPIRATOR: Is designed for the professional who demands a system that will give great performance, ease of use, along with a comfortable fit. PRO AIR Supplied air respirators give you the protection from harmful Isocyanates allowing only cooling  fresh air into a half mask and eliminates fogging in hoods and helmets. The PRO AIR two stage turbine gives out a positive air flow of 6.5 cfm of air and includes 40 ft of hose and  a belt line hookup which will enable you to tie both air and paint hoses together in order to give you the convenience of a single hose. Designed to give safe and affordable protection to the professional painter Supplied air respirators are the safe way. to paint And are  OSHA, NIOSH & MSHA Approved for the small to large business that is required to comply with these standards.

what's included with basic system

PROAIR two stage turbine. 6.5 cfm

40 feet of air delivery hose.

Half mask.

Belt line hookup.

Other options are available, check the Accessories page.

PRO AIR 40
NIOSH Approved Fresh Air Respirators

Pro Air 40 comes standard with an air pump, 40' of hose and a half facemask for one person. Locate the intake air pump in a fresh air location and breathe HEPA filtered clean fresh air in virtually any contaminated breathing environment.

Because a variety of chemicals will be absorbed by your eyes we offer the following options:

1. Pull a painting hood over your half facemask. This makes a versatile system because you are able to wear only the half facemask for sanding and similar jobs, but when it's time to paint you are fully protected by pulling the painting hood over the half facemask. Don't forget Hood Lens Covers.

2. Consider a full facemask which is a great choice if you will be using your Hobbyair/Proair Respirator in tight places such as the fuselage of an airplane or if you spray numerous hours a week. Don't forget full mask lens covers  and if you wear glasses you'll need an eyeglass frame kit 

 Remember to choose a Pro Air Respirator unit with enough hose to get your air pump outside in fresh air and still have enough hose to work around your project.

For more ideas on locating your air pump in fresh air check our accessories, Remote Air Intake Adaptor  or a Thru-Wall-Fitting 

: Respirator info

AIR Suggested Retail*  CLM Price
PROAIR 40 (40ft hose, half mask)
 
$699.00 $599.00

Quantity
PROAIR 40F (40ft hose, full mask)

<  don't forget your lens protectors

$845.00 $745.00
Quantity
Lens protectors for full mask
Quantity  
 

 *US funds $ dollars Prices subject to change without notice.  no guarantee on pricing in case of mispelling or incorrect price.

RESPIRATOR ACCESSORIES

Back to Main menu